南海北部陆坡深水区浅层天然气藏特征     

钟广见  张如伟  易海  冯常茂  赵忠泉 《热带海洋学报》2018,37(3):80-85

南海北部陆坡深水区的浅层天然气藏是一种伴随天然气水合物的新型油气藏, 具有埋藏浅、规模大的特点, 其埋藏深度一般小于300m。浅层天然气藏由深部裂解气沿断裂上升被天然气水合物封盖而形成, 识别似海底反射(BSR)是寻找浅层天然气藏有效方法。浅层天然气藏的气源主要有热解气、生物气和混合气, 陆坡张性断裂是气体运移的主要通道, 水合物下部的砂层是浅层天然气藏的主要储集层, 水合物层则是封盖层。从南海发现的天然气水合物分布特征看, 浅层天然气藏在陆坡深水区广泛分布且气藏厚度大, 潜在资源量非常可观, 是一种新型的开采成本相对低廉的油气藏。  相似文献   

福建政和县东际金（银）矿床黄铁矿微量元素和硫-铅同位素及锆石年龄研究     

肖凡  班宜忠  范飞鹏  许乃岑  毛光武  李凤春 《中国地质》2020,47(2):375-393

东际金(银)矿床赋存于燕山晚期南园组火山岩中,是东南沿海地区一个隐爆角砾岩型贵金属矿床,已探明金资源量达12.5 t,银资源量135.9 t。通过开展主要金属硫化物黄铁矿电子探针和硫-铅同位素分析,讨论了成矿作用和成矿物质来源等问题。研究表明,东际金(银)矿床黄铁矿Co/Ni值3～94(平均值23)且Co含量为500×10-6～1070×10-6(均值799×10-6),Fe/(S+As)值0.827～0.871(均值0.860),Au/Ag值0.9～5.5(均值2.6),反映该矿床是与陆相火山作用有关的浅成中低温热液型矿床。黄铁矿δ34S在-6.6‰～-0.7‰,206Pb/204Pb为17.9801～18.4303,207Pb/204Pb为15.2689～15.9397,208Pb/204Pb为37.9052～38.7871,指示成矿物质主要来源于具有壳幔混源性质的花岗质岩浆,此外含矿热液也活化萃取了部分基底变质岩和火山岩围岩的金属元素。通过锆石U-Pb年代学研究和区域成矿资料对比,东际金(银)矿床成矿时代可被限定于早白垩世晚期。  相似文献   

新疆伊犁地区季节冻土沿海拔的分布规律及其影响因素     

郝建盛  张飞云  黄法融  李兰海 《冰川冻土》2020,42(4):1179-1185

基于2000 - 2014年新疆伊犁地区不同海拔区域观测的冻融期内的冻土、 积雪和气象数据， 应用相关性分析和回归分析方法， 分析该地区季节冻土沿海拔的分布规律， 以及气温、 积雪对季节冻土特征的影响。结果表明： 伊犁地区表层土壤存在着每年11月份开始结冻， 于次年4月份完全融化的周期性变化。每个周期内土壤冻结时长随海拔以4 d·（100m）^-1的趋势增加， 土壤最大冻结深度随海拔以3.9 cm·（100m）^-1的趋势增加。土壤冻结时长与冻结期的平均气温具有显著负相关关系， 相关系数为-0.98（P<0.05）。土壤冻结日数与积雪覆盖历时呈正相关关系， 土壤的最大冻结深度与最大雪深呈负相关关系。随着海拔升高， 温度递减， 导致伊犁地区土壤最大冻结深度和土壤冻结日数整体呈现增加趋势。但在海拔相对较高的地区， 由于相对较厚积雪的影响， 出现土壤最大冻结深度随海拔升高而减小的反常现象。研究结果可为新疆伊犁地区季节冻土的分布对气候变化的响应研究提供支持， 帮助研究区域生态规划和水资源管理， 为农业发展制定适应气候变化对策。  相似文献   

基于GIS的石家庄市雾霾分析     

苏亚聪  史娟  徐爽 《北京测绘》2020,(2):233-237

为了得出雾霾气象成因机制、影响因素和时空分布特征,以石家庄市区与郊县为研究区域,将2013年9月至2016年12月石家庄市各市区、郊县的PM2.5历史监测数据中的有效数据进行了数据分析处理得到雾霾浓度数据,还有温度、降水、风速、地形和人口密度等数据,运用GIS分析的方法,模拟绘制石家庄雾霾的时空分布图、雾霾与各影响因子的专题对比图,得到雾霾形成机制的因子、雾霾的时空分布规律、雾霾季节变化特征、雾霾与地形间的关系等;运用数据分析软件OriginPro8.SR3分析雾霾浓度与风速数据、降雨数据、温度数据间的相关性。  相似文献   

基于倾斜摄影测量的大比例尺三维测图技术     

李通 《北京测绘》2020,(4):543-546

目前,城市大比例尺地形图更新主要采用全野外的测量方法,不仅耗费大量的劳动力,并且效率低下。旋翼机和倾斜摄影测量技术的快速发展,为城市大比例尺地形图的测绘与更新提供了全新的技术手段。本文以滕州市城区约10 km2的1∶500地形图测绘项目为例,采用大疆精灵4 Pro旋翼机进行数据获取,Smart 3D软件进行空三加密及三维建模,最后在EPS软件中进行三维测图,并对地形图成果进行了精度检核,验证了技术方案的可行性,为同类项目提供了有益参考。  相似文献   

Loading protocols for experimental seismic qualification of members in conventional and emerging steel frames     

Cheng Fang  Yiwei Ping  Yiyi Chen 《地震工程与结构动力学》2020,49(2):155-174

Quasi-static testing is one of the most commonly used experimental methods for examining the seismic performance of structural members. However, consistent loading protocols for experimental seismic qualification of members in emerging steel frames such as self-centering braced frames (SCBFs) as well as in some conventional ones including buckling-restrained braced frames (BRBFs) are still lacking. This paper aims to propose standardized loading protocols based on time-history dynamic analysis on a series of prototype building frames, including steel SCBFs, BRBFs, and moment-resisting frames (MRFs), where both far-field and near-fault earthquakes are considered. The methodology for the development of the loading protocols involves ground motion selection and scaling, design and analysis of prototype buildings, analysis results processing, and rainflow cycle counting, together with extra justification steps. The proposed loading protocols are consistently derived based on the MCE-level seismic hazard and 84^th percentile values of key seismic demand parameters. These parameters are number of damaging cycles N_t, maximum inter-story drift θ_max, inter-story drift range Δθ_i, sum of inter-story drift range ΣΔθ_i, and residual inter-story drift θ_r. The analysis confirms the variations in these seismic demands imposed on the different structural systems under different types of ground motions, highlighting the necessity of developing separate loading protocols for the different cases. The assumptions, decisions, and judgments made during the development of the loading protocols are elaborated, and the conditions and restrictions are outlined. The rationality of the proposed loading protocols is further justified through demonstrating the cumulative distribution function and energy dissipation demand of the systems.  相似文献   

Socio-hydrological framework for investigating farmers’ activities affecting the shrinkage of Urmia Lake; hybrid data mining and agent-based modelling     

Parsa Pouladi  Amir Molajou  Mohammad Hadi Afshar 《水文科学杂志》2020,65(8):1249-1261

ABSTRACT

Developing a general framework to capture the complexities associated with the non-linear and adaptive nature of farmers facing water resources scarcity is a challenging problem. This paper integrates agent-based modelling (ABM) and a data mining method to develop a hybrid socio-hydrological framework to provide future insights for policy-makers. The data associated with the farmers’ main characteristics were collected through field surveys and interviews. Afterwards, the association rule was employed to discover the main patterns representing the farmers’ agricultural decisions. The discovered patterns were then used as the behavioural rules in ABM to simulate the agricultural activities. The proposed framework has been was applied to explore the interactions between agricultural activities and the main river feeding the Urmia-Lake, Iran. The outcomes indicate that farmers’ acquisitive traits and belongings have significant impacts on their socio-hydrological interactions. The reported values of the efficiency criteria may support the satisfactory performance of the proposed framework.  相似文献   

Water transport and tracer mixing in volcanic ash soils at a tropical hillslope: A wet layered sloping sponge     

Giovanny M. Mosquera  Patricio Crespo  Lutz Breuer  Jan Feyen  David Windhorst 《水文研究》2020,34(9):2032-2047

Andosol soils formed in volcanic ash provide key hydrological services in montane environments. To unravel the subsurface water transport and tracer mixing in these soils we conducted a detailed characterization of soil properties and analyzed a 3-year data set of sub-hourly hydrometric and weekly stable isotope data collected at three locations along a steep hillslope. A weakly developed (52–61 cm depth), highly organic andic (Ah) horizon overlaying a mineral (C) horizon was identified, both showing relatively similar properties and subsurface flow dynamics along the hillslope. Soil moisture observations in the Ah horizon showed a fast responding (few hours) “rooted” layer to a depth of 15 cm, overlying a “perched” layer that remained near saturated year-round. The formation of the latter results from the high organic matter (33–42%) and clay (29–31%) content of the Ah horizon and an abrupt hydraulic conductivity reduction in this layer with respect to the rooted layer above. Isotopic signatures revealed that water resides within this soil horizon for short periods, both at the rooted (2 weeks) and perched (4 weeks) layer. A fast soil moisture reaction during rainfall events was also observed in the C horizon, with response times similar to those in the rooted layer. These results indicate that despite the perched layer, which helps sustain the water storage of the soil, a fast vertical mobilization of water through the entire soil profile occurs during rainfall events. The latter being the result of the fast transmissivity of hydraulic potentials through the porous matrix of the Andosols, as evidenced by the exponential shape of the water retention curves of the subsequent horizons. These findings demonstrate that the hydrological behavior of volcanic ash soils resembles that of a “layered sponge,” in which vertical flow paths dominate.  相似文献   

基于深度学习理论的无人机影像分类     

阳成 《北京测绘》2020,(4):481-484

针对无人机影像深度学习分类方法缺乏现状,本文利用深度学习理论卷积神经网络方法对无人机影像进行了分类。该法首先抽取无人机影像作为训练集和检验集,然后建立一个2个卷积层-池化层的卷积神经网络模型进行深度学习,通过设定参数并运行模型实现无人机影像分类。实验表明,本文提出的方法可完成较复杂地区无人机影像分类,其分类精度与支持向量机方法相当,为无人机遥感影像分类提供了一个崭新的技术视点。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献